Micro BetaCHIP Probe (MCD)
Polyimide housed probe, suitable for applications where small size and rapid response are critical
The micro-BetaCHIP probe is BetaTHERM's smallest packaged thermister device. The probe is produced for applications that require rapid temperature response and applications where space is very limited. The probes are extremely small (0.457mm dia.) and fragile. The sensor is potted in a polyimide tube with epoxy. Adequate moisture protection should be provided when using the device in high humidity applications. The size of the micro-BetaCHIP thermistors allows it to be installed in 20 AWG (0.914mm dia.) thin wall hypodermic tubing. Custom probe assemblies protect the thermistor element from high humidity and mechanical shock.
The small mass of the unit allows the sensor to respond very rapidly to temperature changes. This makes the micro-BetaCHIP thermister suitable for low volume gas or liquid flow sensing. The probes are also small enough to be mounted inside Medical catheters.
more about Micro BetaCHIP Probe (MCD) >>
Medical Grade Thermistor | Micro BetaCHIP Probe (MCD) | Mini BetaCURVE Probe (MBD) | Mini BetaCURVE Probe (MRBD) - High Humidity environments | Mini Sensor (twisted wire) | Miniature Axial Glass (GA) & Radial Glass (GR) Thermistors | Mylar Tube Sensor | Non-Invasive Skin Sensor | NPT Stainless Steel Immersion Sensor | Overmoulded Probe | Overmoulded Detachable Probe | Pipe Clamp Sensor | Radial Glass Thermistor - A Series | Radial Glass Thermistor - B Series | Radial Glass Thermistor A Series (Interchangeable) | Respiratory Sensor | Round Ended Vinyl Probe | Series 1 BetaCurve Bare leaded Thermistors | Series 1 SMD 1206 | Series 2 BetaCurve Insulated Thermistor | Series 2 SMD 0805 | Series 3 BetaCurve Bare leaded Thermistors |
|
