Overmoulded Detachable Probe
The NTC temperature sensor and extension cable are moulded together using a high grade thermoplastic material.This unique process provides a high degree of protection against extreme and harsh environmental conditions.
The NTC temperature sensor and extension cable are moulded together using a high grade thermoplastic material. This unique process provides a high degree of protection against extreme and harsh environmental conditions. The probe is also available in a stainless steel housing (316)for additional mechanical protection. Other temperature sensor types such as PT 100 &PT 1000 can also be supplied in this probe assembly for specific applications.
Reliability Testing
Betatherm have carried out freeze/thaw thermal cycling on the over-moulded temperature probe.The thermal cycle testing involved the freezing of the probe head in conjunction with water-spray to expose the probe to 'ice-crush ' conditions.The temperature of the probe is then rapidly elevated using a hot air-stream that thaws the ice around the probe head.The total thermal cycle time involved is 30 minutes.The probes have been tested to 5,000 cycles under these extreme conditions.
more about Overmoulded Detachable Probe >>
Overmoulded Probe | Overmoulded Detachable Probe | Pipe Clamp Sensor | Radial Glass Thermistor - A Series | Radial Glass Thermistor - B Series | Radial Glass Thermistor A Series (Interchangeable) | Respiratory Sensor | Round Ended Vinyl Probe | Series 1 BetaCurve Bare leaded Thermistors | Series 1 SMD 1206 | Series 2 BetaCurve Insulated Thermistor | Series 2 SMD 0805 | Series 3 BetaCurve Bare leaded Thermistors | Series 3 SMD 0603 | Series 4 BetaCurve Bare leaded Thermistors | Series 4 SMD 0402 | Series 5 BetaCurve Bare leaded Thermistors | Series 6 BetaCurve Medical Grade Thermistor | Series 7 BetaChip Bare leaded Thermistors | Silver Leadless Chips | SMD Thermistor Flexible Circuit | Spherical Ended Stainless Steel Probe |
|
