Overmoulded Probe

The overmoulded design is ideal for harsh environments where accurate temperature sensing or control is required for freeze-thaw conditions.

BetaTHERM's overmoluded thermistor probe is developed for demanding HVAC & Refrigeration applications. It is ideal for harsh environments where accurate temperature sensing or control is required for freeze-thaw conditions.

The probe is available in a range of standardized tolerances and curves, optional stainless steel housing for additional mechanical protection or made to meet your customized electrical, housing and lead length requirements.

Reliability Testing
BetaTHERM has conducted freeze/thaw thermal cycling on the overmolded temperature probe.The thermal cycle testing involved freezing the probe head in conjunction with water-spray to expose the probe to 'ice-crush ' conditions. The temperature of the probe is then rapidly elevated using a hot air-stream that thaws the ice around the probe head. The total thermal cycle time involved is 30 minutes.The probes have been tested to 20,000 cycles under these extreme conditions.

more about Overmoulded Probe >>

NPT Stainless Steel Immersion Sensor | Overmoulded Probe | Overmoulded Detachable Probe | Pipe Clamp Sensor | Radial Glass Thermistor - A Series | Radial Glass Thermistor - B Series | Radial Glass Thermistor A Series (Interchangeable) | Respiratory Sensor | Round Ended Vinyl Probe | Series 1 BetaCurve Bare leaded Thermistors | Series 1 SMD 1206 | Series 2 BetaCurve Insulated Thermistor | Series 2 SMD 0805 | Series 3 BetaCurve Bare leaded Thermistors | Series 3 SMD 0603 | Series 4 BetaCurve Bare leaded Thermistors | Series 4 SMD 0402 | Series 5 BetaCurve Bare leaded Thermistors | Series 6 BetaCurve Medical Grade Thermistor | Series 7 BetaChip Bare leaded Thermistors | Silver Leadless Chips | SMD Thermistor Flexible Circuit |