Series 3 BetaCurve Bare leaded Thermistors

Epoxy coated device with 30 AWG tin plated copper lead wires (Dissipation Constant: 2.0 mW/°C)

BetaCURVE Thermistor Series III are similar in construction to Series I except for the use of larger (30 AWG) copper leads. This allows the Dissipation Constant (D.C.) to be raised from 0.75mW/°C to 2.0mW/°C. Larger leads also facilitate easier handling during assembly operations. The Thermal Time Constant is raised to 14 seconds in air. Custom resistance values and tolerances are available upon request.

more about Series 3 BetaCurve Bare leaded Thermistors >>

Series 2 SMD 0805 | Series 3 BetaCurve Bare leaded Thermistors | Series 3 SMD 0603 | Series 4 BetaCurve Bare leaded Thermistors | Series 4 SMD 0402 | Series 5 BetaCurve Bare leaded Thermistors | Series 6 BetaCurve Medical Grade Thermistor | Series 7 BetaChip Bare leaded Thermistors | Silver Leadless Chips | SMD Thermistor Flexible Circuit | Spherical Ended Stainless Steel Probe | Stainless Steel BSP Immersion Sensor | Stainless Steel Flange Micro Probe | Stainless Steel Hex Bolt Sensor | Stainless Steel Immersion Probe | Stainless Steel Screw Immersion Sensor | Stainless Steel Surface Probe | Surface Mount Flag Terminal Probe | Surface Mount Ring Terminal Probe | Surface Sensor: 10mm (0.394") Diameter, Solid Ribbon Cable Leads | Surface Sensor: 10mm (0.394") Diameter, Stranded Ribbon Cable Leads | Surface Sensor: 5mm (0.197") Diameter, Solid Ribbon Cable Leads |