Series 4 BetaCurve Bare leaded Thermistors

Epoxy coated device with 28 AWG tin plated copper lead wires (Dissipation Constant: 3.0 mW/°C)

BetaTherm Thermistor Series IV provides a higher Dissipation Constant (3.0mW/°C) allowing design engineers greater flexibility on sensor design projects. The higher D.C. is achieved using 28 AWG tin plated copper lead wires and also larger chip thermistor elements. These chip elements are manufactured using the same high quality materials and manufacturing process as Series I. Custom resistance values and tolerances are available upon request.

more about Series 4 BetaCurve Bare leaded Thermistors >>

Series 3 SMD 0603 | Series 4 BetaCurve Bare leaded Thermistors | Series 4 SMD 0402 | Series 5 BetaCurve Bare leaded Thermistors | Series 6 BetaCurve Medical Grade Thermistor | Series 7 BetaChip Bare leaded Thermistors | Silver Leadless Chips | SMD Thermistor Flexible Circuit | Spherical Ended Stainless Steel Probe | Stainless Steel BSP Immersion Sensor | Stainless Steel Flange Micro Probe | Stainless Steel Hex Bolt Sensor | Stainless Steel Immersion Probe | Stainless Steel Screw Immersion Sensor | Stainless Steel Surface Probe | Surface Mount Flag Terminal Probe | Surface Mount Ring Terminal Probe | Surface Sensor: 10mm (0.394") Diameter, Solid Ribbon Cable Leads | Surface Sensor: 10mm (0.394") Diameter, Stranded Ribbon Cable Leads | Surface Sensor: 5mm (0.197") Diameter, Solid Ribbon Cable Leads | Surface Sensor: 5mm (0.197") Diameter, Stranded Ribbon Cable Leads | Teflon Probe |