Series 5 BetaCurve Bare leaded Thermistors
Epoxy coated device with 32 AWG tin plated copper lead wires (Dissipation Constant: 0.75 mW/°C)
The BetaCURVE Thermistor Series V are small epoxy coated devices with solid tin plated copper lead wires. Due to the low nominal resistance values, these devices are suitable for measurement applications at the lower temperature ranges. The use of tin plated copper wires minimize the effects of lead wire resistance. Series V is specified with a temperature tolerance of ±0.2°C over the range 0°C to 25°C. The series does not offer color coding (all thermistor in this series are coated with black epoxy).
more about Series 5 BetaCurve Bare leaded Thermistors >>
Series 4 SMD 0402 | Series 5 BetaCurve Bare leaded Thermistors | Series 6 BetaCurve Medical Grade Thermistor | Series 7 BetaChip Bare leaded Thermistors | Silver Leadless Chips | SMD Thermistor Flexible Circuit | Spherical Ended Stainless Steel Probe | Stainless Steel BSP Immersion Sensor | Stainless Steel Flange Micro Probe | Stainless Steel Hex Bolt Sensor | Stainless Steel Immersion Probe | Stainless Steel Screw Immersion Sensor | Stainless Steel Surface Probe | Surface Mount Flag Terminal Probe | Surface Mount Ring Terminal Probe | Surface Sensor: 10mm (0.394") Diameter, Solid Ribbon Cable Leads | Surface Sensor: 10mm (0.394") Diameter, Stranded Ribbon Cable Leads | Surface Sensor: 5mm (0.197") Diameter, Solid Ribbon Cable Leads | Surface Sensor: 5mm (0.197") Diameter, Stranded Ribbon Cable Leads | Teflon Probe | Twisted Wire Sensor | Vinyl Cap Sensor (Solid Core Ribbon Cable Leads) |
|
