Stainless Steel Flange Micro Probe

Suitable for applications where small size and rapid response are critical (Stainless steel housing)

The Micro-BetaChip device is soldered onto the extension cable. The unit is positioned in the S.Steel housing and backfilled with an epoxy resin. The small mass of the unit allows the sensor to respond very rapidly to temperature changes.

more about Stainless Steel Flange Micro Probe >>

Stainless Steel BSP Immersion Sensor | Stainless Steel Flange Micro Probe | Stainless Steel Hex Bolt Sensor | Stainless Steel Immersion Probe | Stainless Steel Screw Immersion Sensor | Stainless Steel Surface Probe | Surface Mount Flag Terminal Probe | Surface Mount Ring Terminal Probe | Surface Sensor: 10mm (0.394") Diameter, Solid Ribbon Cable Leads | Surface Sensor: 10mm (0.394") Diameter, Stranded Ribbon Cable Leads | Surface Sensor: 5mm (0.197") Diameter, Solid Ribbon Cable Leads | Surface Sensor: 5mm (0.197") Diameter, Stranded Ribbon Cable Leads | Teflon Probe | Twisted Wire Sensor | Vinyl Cap Sensor (Solid Core Ribbon Cable Leads) | Vinyl Cap Sensor (solid leads) with molded Molex-style connector | Vinyl Cap Sensor (Stranded Core Ribbon Cable Leads) | Vinyl Cap Sensor (stranded leads) with molded 3-Pin DIN connector | Vinyl Cap Sensor (stranded leads) with molded Molex-style connector | Vinyl Cap Sensor (stranded leads) with molded Phono-style connector  | Vinyl Cap Sensor (twisted leads) with molded Molex-style connector | Vinyl Cap Sensor (Twisted Pair Leads) |