Teflon Probe

NTC Thermistor Bead soldered to extension cable and encapsulated in a (teflon insulated) mylar sleeve

Teflon Probe assembly consists of an NTC Thermistor Bead soldered to extension cable and encapsulated in a mylar sleeve using an epoxy resin. A Teflon Heat-Shrink Sleeve is positioned over the Mylar assembly. Heat is applied to the Teflon Sleeve. The heat closes the open end of the sleeve and melts the remainder around the Teflon insulated cable providing a moisture proof seal.

more about Teflon Probe >>

Surface Sensor: 5mm (0.197") Diameter, Stranded Ribbon Cable Leads | Teflon Probe | Twisted Wire Sensor | Vinyl Cap Sensor (Solid Core Ribbon Cable Leads) | Vinyl Cap Sensor (solid leads) with molded Molex-style connector | Vinyl Cap Sensor (Stranded Core Ribbon Cable Leads) | Vinyl Cap Sensor (stranded leads) with molded 3-Pin DIN connector | Vinyl Cap Sensor (stranded leads) with molded Molex-style connector | Vinyl Cap Sensor (stranded leads) with molded Phono-style connector  | Vinyl Cap Sensor (twisted leads) with molded Molex-style connector | Vinyl Cap Sensor (Twisted Pair Leads) | Air/Gas Stainless Steel Probe | Aluminium Immersion Probe | Aluminium Surface Probe | Axial Thermistor (DO35) | Blood Analysis Probe | Brass Immersion Sensor (Faston Tabs) | Brass Immersion Sensor (Lumberg Connector) | Catheter Probe | Conical Ended Immersion Probe | Fast Response Brass Probe | Fast time response sensor (screw head) |